Bachelor courses
Speciality Code:
6B05403
Speciality Name:
Mechanics
Faculty:
Mechanics and Mathematics
Qualification:
- First Stage of Higher Education - Bachelor of Natural Science
- Model of graduating student
- Mandatory disciplines
- Elective disciplines
- Professional
1. ON1 demonstrate knowledge of basic mathematical disciplines, namely, mathematical and tensor analysis, linear algebra and analytical geometry, differential equations, probability theory and mathematical statistics, variational calculus, calculation methods;
2. ON2 demonstrate the knowledge of the fundamentals of mechanics, namely, theoretical mechanics, deformable solid mechanics, continuum mechanics, fluid mechanics, mechanics of mechanisms, machines and robotic systems;
3. ON3 demonstrate basic knowledge of computer literacy, the basics of programming, the basics of computer modeling;
4. ON4 to understand and explain the meaning of the basic physical laws, the basics of chemistry, as well as to orient in the tasks and basic methods of solving them in one of the chosen areas of mechanics;
5. ON5 to formulate the physical formulation of the problems of mechanics and select an adequate mathematical model for the task;
6. ON6 to apply theoretical and experimental methods for studying problems of mechanics and select appropriate methods (analytical, numerical, experimental) for solving specific problems of mechanics;
7. ON7 conduct laboratory and numerical experiments, evaluate the accuracy and reliability of simulation results;
8. ON8 to write codes using modern programming languages and to be able to use modern software for solving problems of mechanics;
9. ON9 to carry out research work on the chosen topic, using the studied methods, analyze the results obtained and receive reasonable conclusions;
10. ON10 summarize the results of research and analytical work, report at student scientific conferences, participate in research projects;
11. ON11 to find and analyze information necessary for professional activity using linguistic and linguocultural knowledge, means and methods of information and communication technologies;
12. ON12 use practical skills and abilities that ensure the preservation and strengthening of health, to realize the need to developing and improve their own abilities and skills.
2. ON2 demonstrate the knowledge of the fundamentals of mechanics, namely, theoretical mechanics, deformable solid mechanics, continuum mechanics, fluid mechanics, mechanics of mechanisms, machines and robotic systems;
3. ON3 demonstrate basic knowledge of computer literacy, the basics of programming, the basics of computer modeling;
4. ON4 to understand and explain the meaning of the basic physical laws, the basics of chemistry, as well as to orient in the tasks and basic methods of solving them in one of the chosen areas of mechanics;
5. ON5 to formulate the physical formulation of the problems of mechanics and select an adequate mathematical model for the task;
6. ON6 to apply theoretical and experimental methods for studying problems of mechanics and select appropriate methods (analytical, numerical, experimental) for solving specific problems of mechanics;
7. ON7 conduct laboratory and numerical experiments, evaluate the accuracy and reliability of simulation results;
8. ON8 to write codes using modern programming languages and to be able to use modern software for solving problems of mechanics;
9. ON9 to carry out research work on the chosen topic, using the studied methods, analyze the results obtained and receive reasonable conclusions;
10. ON10 summarize the results of research and analytical work, report at student scientific conferences, participate in research projects;
11. ON11 to find and analyze information necessary for professional activity using linguistic and linguocultural knowledge, means and methods of information and communication technologies;
12. ON12 use practical skills and abilities that ensure the preservation and strengthening of health, to realize the need to developing and improve their own abilities and skills.
-
Kazakh (Russian) Language
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description:
-
Module of Socio-Political Knowledge (Sociology/ Political Science/ Culture/ Psychology)
- Number of credits: 8
- Type of control: RK + Exam (100)
- Description: Aim оf discipline: to develop the ability to explain and interpret subject knowledge in all fields of science, shaping of the discipline. Sociology and sociological perspectives, social structure, form of policy, organizational structure, institutions, the legal and organizational rules, content, purpose, value, policy, concept and essence of culture, semiotics of culture, psychology of personality, psychology of interpersonal communication will be studied.
-
Military Training
- Number of credits: 6
- Type of control: MC
- Description: Military Training
-
Mathematical Analysis 1
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of fundamental knowledge of mathematical analysis and practical skills in applying the obtained mathematical apparatus to solving specific problems. This course will study: the theory of sequences and functions of one variable, limits and continuity of a function, derivative, differential, differential calculus.
-
Mathematical Analysis 2
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The discipline is aimed at studying indefinite integrals, integration methods. The followings will be considered: indefinite integral, techniques of integration, arc length, volumes and surface areas of solids of revolution, improper integrals, sequences and infinite series, Taylor series, vectors and analytic geometry in 3-space, functions of several variables, partial derivatives, directional derivatives, tangent plane, extreme values, double integrals.
-
Mechanical Systems Design
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' knowledge and skills in the design of flat lever mechanisms. Content: kinematic, power analysis of flat lever mechanisms, minimization of the total mass of mechanisms, rational choice of the structure and parameters of mechanisms.
-
Physics
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Purpose: the formation of the foundations of the natural-scientific picture of the world, knowledge of the basic laws of physics and the skills of their practical application in solving problems. Will be studied: basic physical phenomena, basic laws of physics; limits of their applicability, application of laws in practical applications.
-
Physical Foundations of Mechanics
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' fundamental knowledge of the physical foundations of mechanics, as well as practical skills for conducting experimental research on various instruments and installations, processing and analyzing the results, drawing conclusions.
-
Analitical mechanics
- Number of credits: 6
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Analytical mechanics Basic concepts. Connection types. Elementary work of force. Virtual and true displacements. Number of degrees of freedom. Generalized coordinates, velocities and forces. The principle of possible displacements. D'Alembert's principle. General theorems deduced from the d'Alembert's principle. D'Alembert-Lagrange principle. Lagrange multiplier method. Lagrange equations of the first kind. Lagrange equations of the second kind. Energy integral. Cyclic coordinates. Coordinate ignoring method. Routhian function. Routh's equations. Cyclic integral. Hamilton's principle.
-
Introduction to Continuum Mechanics
- Number of credits: 9
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of fundamental knowledge of the mechanics of the material continuum and practical skills in proving theorems, deriving basic equations and solving practical problems of continuum mechanics. In this course will be studied: kinematics of a continuous medium; deformation theory; basic theorems and equations of dynamics; basic concepts and equations of electrodynamics; classical models of continuous media.
-
Computational Mechanics
- Number of credits: 9
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the course: teaching students how to build finite-dimensional models of continuous media using computer simulation and numerical methods for solving problems of solid mechanics and fluid mechanics. Course content: methods of numerical integration and differentiation; problems of mechanics, reduced to equations of parabolic, hyperbolic, elliptic The purpose of the course is to teach students basic numerical methods in mechanics problems, which include the following topics: mathematical modeling, approximation and round-off errors, Taylor series expansion, roots of equations and polynomials, SLAE solution, one-dimensional and multidimensional optimization, curve fitting and interpolation, numerical differentiation and integration, ODE solution, an introduction to PDE solution.
-
Dynamics of solid bodies
- Number of credits: 6
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose: to provide theoretical knowledge in the dynamics of absolutely rigid bodies, which has extensive technical applications; to familiarize the fundamentals of analytical mechanics; to develop skills in applying the studied methods and principles to solve mechanical problems. Topics: rigid body dynamics, methods of analytical mechanics, Lagrange's equations, etc.
-
Differential equations
- Number of credits: 9
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Objective: to acquaint students with basic concepts and methods for solving ordinary differential equations, principles of mathematical modeling of applied problems of the theory of differential equations; is to acquaint students with the theory and current problems of the partial differential equation and modern methods for solving them. Tasks: the basic concepts of ordinary differential equations, they are basic types of first-order differential equations and linear equations and systems with constant coefficients, the physical problems leading to partial differential equations.
-
Partial Differential Eguations
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: To form the ability to solve problems for partial differential equations and know the basic theory. The content of the discipline is aimed at studying the classification of partial differential equations and bringing them to canonical form, Fourier methods, thermal potentials, the continuation method and Green's functions, the maximum principle, the Cauchy problem, mixed problems, the Duhamel principle.
-
Foreign Language
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Purpose: to form the improvement of knowledge of foreign language communicative competence. The main methods of speech skills and foreign language communication skills are considered as a basis for the development of communicative competence; implementation of acquired speech skills in the process of searching, selecting and using material in English.
-
Information-Communication Technologies
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: During the study of the discipline students will learn following aspects:ICT role in key sectors of development of society. Microsoft Office Windows Cybersafety. Internet technologies. Cloud and mobile technologies. Multimedia technologies. Smart Technology. E-technologies. Electronic business. E-learning. Electronic government. Information technologies in the professional sphere.
-
Linear algebra and analytical geometry
- Number of credits: 6
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Purpose: formation of professional skills in solving problems of linear algebra and analytical geometry Will be studied: The set of complex numbers. Systems of linear algebraic equations. Matrices and operations on matrices. Theory of determinants. Vector space, subspaces. Linear dependence, base and rank of a system of vectors. Matrix rank theorems. Vector algebra. Scalar, vector, mixed product of vectors. Equations of lines and planes. Canonical equations of curves and surfaces of the second order.
-
Mathematical analysis
- Number of credits: 9
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Objective: to lay the foundations of fundamental concepts of mathematical analysis and to form the skills of studying the differential, integral calculus of functions of one variable, the theory of series. Tasks: numerical continuity, limit of functions, uniform continuity of functions; application of derivative, basic theorems of differential calculus, Taylor's formula; methods of integration, theorems on averages, use of definite integrals; convergence of numerical ranks, uniform equivalence of functional ranks, decomposition of functions into gradual ranks.
-
Computational methods
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the course: the formation of students' systemic knowledge and practical skills on the methods of calculating mathematical problems. In this course will be studied: exact and iterative methods for solving linear equations; iterative methods for solving algebraic and transcendental equations; function interpolation; approximate calculation of integrals; approximation of normed spaces and differential operators; numerical methods for solving the Cauchy problem for ordinary differential equations and boundary value problems for ordinary differential equations.
-
Mechanics of Solid Deformable Body
- Number of credits: 9
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the course: the formation of systemic knowledge on the theoretical foundations of the mechanics of a deformable solid body and practical skills in applying analytical methods for solving problems of calculating elastically and inelastically deformable bodies. In this course will be studied: the intensity of deformations and stresses; classical theories of strength, basic relations of the linear theory of elasticity, models of the theory of linear viscoelasticity, viscoplastic body, flow theory, deformation theory of plasticity.
-
Fluid and Gas Mechanics
- Number of credits: 9
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' systemic knowledge of the basic concepts, laws and sections of fluid and gas mechanics and practical skills in building a mathematical model and solving the problem of fluid and gas mechanics. In this course will be studied: the basics of hydrostatics, the general theory of the movement of an ideal fluid and gas, the irrotational movement of an ideal medium; dynamics of a viscous incompressible fluid.
-
Materials mechanics
- Number of credits: 6
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Purpose: mastering the theoretical foundations and practical methods of calculations for the strength, rigidity, stability of the elements of robotic systems, structures and machines with the simplest types of loading, as well as familiarization with modern approaches to the calculation of complex systems. Will be studied: mechanical properties of materials.
-
Ordinary Differential Equations
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Purpose: formation of modern theoretical knowledge in the field of ODE, practical skills in solving, researching the main types of ODE, familiarization with the skills of mathematical modeling of applied problems using DE, analysis of the results obtained. Will study: first order DE; general theory of a system of DE.
-
Fundamentals of Thermodynamics and Heat and Mass Transfer
- Number of credits: 6
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' fundamental knowledge of the basic laws of thermodynamics and heat and mass transfer and practical skills in modeling and solving problems of thermodynamics and heat and mass transfer, the use of engineering methods for calculating temperatures and heat flows in structures of various shapes for various heat transfer conditions, performing heat engineering calculations for specific heat engineering equipment.
-
Political Science
- Number of credits: 2
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The academic discipline “Political science” forms knowledge of the laws and laws of world politics and modern political processes, explaining the essence and content of the policy of national states, on the basis of ensuring national security and the realization of national interests.
-
Psychology
- Number of credits: 2
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of studying the discipline is to provide scientifically grounded training of highly qualified specialists on the basis of studying the fundamental concepts of psychology management, creating the necessary prerequisites for theoretical understanding and practical application of the most important management problems related to the process of professional development.
-
Sociology
- Number of credits: 2
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The course presents general questions of theory and history of sociology, methodology and methods of sociological research, special sociological theories. This course is aimed at shaping the sociological imagination of students, basic ideas about the subject and methods of sociological research, topical problems and sociology branches.
-
Theoretical mechanics
- Number of credits: 9
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose: to outline the fundamental laws of the discipline being studied, its genesis and the main theoretical aspects, including general, special mathematical methods. Mechanics studies the general laws of mechanical motion and interaction, which are common to any material body. In this regard, mechanical movements of their supposed models.
-
Theory of oscillations
- Number of credits: 6
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' fundamental ideas about the basic concepts, laws of oscillatory processes and vibration, about the main methods and approaches for solving typical problems of the theory of oscillations and vibration, analysis of oscillatory processes in various systems and devices, the formation of a correct assessment of the physical patterns observed in oscillatory processes , beneficial and harmful effects of vibrations on equipment and the environment, the use of methods of vibration isolation and vibration protection of oscillating objects.
-
Control theory
- Number of credits: 6
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Purpose: form students' professional competence in control theory, skills in applying control methods and laws in solving problems. Topics: introduction to control theory, introduction to feedback control, system modeling, ordinary differential equations for control modeling, the concept of stability and its definition, second-order systems etc.
-
Philosophy
- Number of credits: 5
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Purpose: to form a systematic understanding of philosophy and its main problems and methods in the context of future professional activities. The main content of ontology and metaphysics is considered in the context of the historical development of philosophy; the importance of key worldview concepts in the modern world.
-
Experimental mechanics
- Number of credits: 9
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the course: the formation of systemic knowledge and practical skills in modeling and experimental research of real physical processes on experimental stands. Will be studied: general characteristics and classification of experiments; experiment planning; setting up an experiment; methods and means of measurement in mechanical systems; measuring instruments, converters and sensors of physical quantities; mathematical processing of experimental data.
-
Physical Training
- Number of credits: 2
- Type of control: РК(с оценкой)
- Description: The purpose of the discipline is the formation of social and personal competencies of students, ensuring the targeted use of the appropriate means of physical culture and sports for preservation, preparation for professional activities. As a result of studying the discipline, the graduate should know the role of physical culture in human development.
-
Module of socio-political knowledge (Culture)
- Number of credits: 2
- Type of control: RK1+RK2 (100)
- Description: Aim оf discipline: to develop the ability to explain and interpret subject knowledge in all fields of science, shaping of the discipline. Sociology and sociological perspectives, social structure, form of policy, organizational structure, institutions, the legal and organizational rules, content, purpose, value, policy, concept and essence of culture, semiotics of culture, psychology of personality, psychology of interpersonal communication will be studied.
-
Module of socio-political knowledge (Political science)
- Number of credits: 2
- Type of control: RK1+RK2 (100)
- Description: Aim оf discipline: to develop the ability to explain and interpret subject knowledge in all fields of science, shaping of the discipline. Sociology and sociological perspectives, social structure, form of policy, organizational structure, institutions, the legal and organizational rules, content, purpose, value, policy, concept and essence of culture, semiotics of culture, psychology of personality, psychology of interpersonal communication will be studied.
-
Module of socio-political knowledge (Psychology)
- Number of credits: 2
- Type of control: RK1+RK2 (100)
- Description: Aim оf discipline: to develop the ability to explain and interpret subject knowledge in all fields of science, shaping of the discipline. Sociology and sociological perspectives, social structure, form of policy, organizational structure, institutions, the legal and organizational rules, content, purpose, value, policy, concept and essence of culture, semiotics of culture, psychology of personality, psychology of interpersonal communication will be studied.
-
Module of socio-political knowledge (Sociology)
- Number of credits: 2
- Type of control: RK1+RK2 (100)
- Description: Aim оf discipline: to develop the ability to explain and interpret subject knowledge in all fields of science, shaping of the discipline. Sociology and sociological perspectives, social structure, form of policy, organizational structure, institutions, the legal and organizational rules, content, purpose, value, policy, concept and essence of culture, semiotics of culture, psychology of personality, psychology of interpersonal communication will be studied.
-
Нistory of Kazakhstan
- Number of credits: 5
- Type of control: [РК1+MT+РК2+ ГЭК] (100)
- Description: The purpose of the discipline is to give objective knowledge about the main stages in the development of the history of Kazakhstan from ancient times to the present. Expected learning outcomes: 1) demonstrate knowledge and understanding of the main stages in the development of the history of Kazakhstan; 2) to correlate the phenomena and events of the historical past with the general paradigm of the world-historical development of human society through critical analysis; 3) to possess the skills of analytical and axiological analysis in the study of historical processes and phenomena of modern Kazakhstan; 4) be able to objectively and comprehensively comprehend the immanent features of the modern Kazakh model of development; 5) Systematize and give a critical assessment of historical phenomena and processes in the history of Kazakhstan. During the study of the discipline students will learn following aspects: Ancient people and the formation of a nomadic civilization, Turkic civilization and the Great Steppe, Kazakhstan in modern times (XVIII - early XX centuries), Kazakhstan as part of the Soviet administrative-command system, Kazakhstan in the world community (1991-2022).
-
Culturology
- Number of credits: 2
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Aim of discipline is to form a bachelor's understanding of the specifics of the development of national culture in the context of world culture and civilization, need to preserve the cultural code of the Kazakh people, ability to pursue in independent professional activity a strategy of preserving the cultural heritage.
-
Software for Fluid and Gas Mechanics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of a foundation of knowledge and professional competencies in solving problems of mechanics of fluids and gases using application software packages. This course discusses the technology of using computer simulation tools for fluid and gas mechanics problems based on educational versions of the Comsol Multiphysic, ANSYS and FlowVision application packages, visualization of the research results.
-
Methods for Statistical Modeling of Turbulent Flows
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the course is to familiarize students with modern methods of modeling turbulent flows, reveal the advantages and disadvantages of such methods, and identify possible ways to solve problems in practical problems of modeling turbulent flows.
-
Mechanics of Robots
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the course: the formation of students' knowledge and skills on modern methods of analyzing the kinematics and dynamics of robotic and mechatronic systems. Will be studied: manipulation robots, direct and inverse problems, working space of the robot and planning the trajectory of the manipulator, solving the kinematics problem using computer technologies, determining the robots working space.
-
The Theory of Probability and Mathematical Statistics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of fundamental knowledge in the theory of probability and mathematical statistics and practical skills in solving probabilistic and mathematical-statistical problems. The content of the discipline: the space of elementary events; probability space; basic probability formulas; independent tests; random variables and their numerical characteristics; characteristic functions; laws of large numbers and limit theorems; basic concepts of sampling theory; point estimates and their properties; methods for finding point estimates; interval estimates; testing of statistical hypothese
-
Computer-aided Design
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' systemic knowledge and professional competence in the computer-aided design system, in the means and methods of automation in mechanical engineering and their constituent elements, in the general principles of building computer-aided design systems as complex organizational and technical systems. Content of the discipline: stages of development of a computer-aided design system, goals of design automation, system properties and structure of a computer-aided design system, interconnection of components of a computer-aided design system, automation of production processes
-
Al-Farabi and Modernity
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Aim of the discipline: to form students' ideas about the scientific and philosophical heritage of the great Turkic thinker Abu Nasr al-Farabi in developing the world and national culture. Learning outcomes: explain the main philosophical contents al-Farabi's heritage and his influence on the formation of Turkic philosophy; influence European Renaissance.
-
Variational calculus and optimization technigues
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The goal of teaching the discipline is to develop in future specialists modern theoretical knowledge in the field of variational calculus and optimization methods. In this course, students will study the simplest variational problem; theory of the first and second variations; variational problem with higher derivatives; you-puke programming; the global minimum theorem; linear and non-linear programming.
-
Variational Methods in Mathematical physics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The aim of the course is the formation of knowledge and professional skills in modern variational methods of mathematical physics. Content of discipline:The simplest extremal problems. Variational of mathematical physics problems. Methods for solving problems of variational calculus. Applied problems of optimal control and basic optimization methods.
-
Introduction to Renewable Energy
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' systemic knowledge about renewable energy sources and practical skills in mathematical modeling of the problems of these physical processes using the methods of computational fluid dynamics. This course will study: Types of renewable energy sources (solar radiation, wind energy, energy of small rivers and streams, tides, waves, biomass energy, geothermal energy). Development of alternative energy in Kazakhstan. International documents (Programs, Laws).
-
Introduction to the theory of bifurcations
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the simple, complex equilibrium states in dynamical systems, limit cycles. Phase portraits of dynamic systems. Bifurcation of two-dimensional dynamic systems. Methods and techniques for studying the system of differential equations, to which the problems of mechanics are given. The separation of variables into fast and slow, averaging over a fast variable. Action-angle canonical variables.
-
Computational Fluid Dynamics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Computational Fluid Dynamics - Subsection continuum mechanics, which includes a combination of physical, mathematical and numerical methods designed to calculate the characteristics of flow processes. The basis of any research in the field of computational fluid dynamics is the formulation of the basic equations of hydro / gas dynamics of flow, namely, the continuity equation, momentum equation, energy equation, the equation of state (for gases) The aim of the course study of the various methods and processes of the above solutions of systems of equations.
-
Hamiltonian mechanics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline is to form students' knowledge of basic concepts and theorems of Hamiltonian mechanics, to acquire skills in applying canonical transformations for solving problems of mechanics and analyzing them on the basis of the solutions found. The following topics are covered in this course: Poisson brackets, Poisson brackets properties, Poisson identity, Lagrange brackets, Lagrange brackets properties, relationships between Poisson and Lagrange brackets, Lagrange function, Lagrange equations of the second kind, Lagrange function properties, and its properties.
-
Scientific Research Methods
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Objective - to develop skills in cognitive activity in the field of science. To use methods of scientific research for understanding and assimilating information. To be able to describe the object of research. To master methods of search, processing of scientific information, systematization, analysis, synthesis to obtain an objective content of scientific knowledge. To apply analytical and practical research methods and argumentation systems for justification, assertion, evaluation.
-
Orbital mechanics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline is the formation of knowledge in the field of orbital mechanics. When studying the discipline will be considered: the Cauchy problem of celestial mechanics. Methods of celestial mechanics: the use of analytical methods, methods of analysis and quantitative methods for solving the characteristics and properties of the problem. Method of instantaneous elements. Centuries, periodic, mixed perturbations. Order, degree, rank, class of disturbance. Concepts of sustainability associated with systems of various variables. Methods for solving limited problems of celestial mechani
-
Fundamentals of Mechanics of Composites
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline is to form students' knowledge in the field of composite materials, which are heterophasic systems, obtained from two or more compensators while preserving the individuality of each individual component, methods for determining the effective characteristics of composites. In this course, students will get acquainted with the basics of composite materials, the generalized Hooke's law, the relationship between stresses and strains, the deformation of plastic materials, the strength of polymer materials.
-
Fundamentals of fracture mechanics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The study of fundamental concepts, concepts and methods of fracture mechanics for solving applied problems, finding out the conditions for the destruction of bodies of various shapes, operating under the action of given loads in certain external conditions.
-
Fundamentals of Perturbation
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: is to form students' knowledge and professional competence in the basics of perturbation theory, to study the methods of perturbation theory in mechanics and cosmodynamics, to apply these methods to study the motion of spacecraft and a rigid body with one fixed point. This course will cover classical methods of perturbation theory (Lindstedt, Poincaré, Zeipel, Birkhoff methods), modern perturbation methods (modifications of the Hori-Deprit method), Delaunay-Hill schemes and analysis of their f
-
Software for Mechanic Problems
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The goal of the course is to teach students modern methods of computer-aided calculation and design of machine parts, mechanisms, structural elements and nodes, methods for performing finite element analysis in the WinMachine AWM environment. In this course, students will become familiar with the introduction to the APM Winmachine system, the general concepts of computer-aided design, the creation of the design model of the core structure, the use of the 3D pre-processor ARM STUDIO to create, load, and generate a finite element grid of three-dimensional models.
-
Software for theoretical and applied mechanics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline is the acquisition by students of the skills of numerical solution of problems of mechanics with the help of application software packages. In this course, students will study the software packages "Mathematics" for solving problems of theoretical and applied mechanics: graphical functions "Plot" and "3D Plot" Methods for solving differential equations; finding the center of mass and moments of inertia, elastic deformation of the body by numerical methods.
-
Legal Bases of Corruption Control
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The goal of the discipline is to form a responsible attitude and the ability to demonstrate in practice the application of the principles and norms of anti-corruption legislation in order to prevent corruption offenses, to form intolerance towards corruption, an anti-corruption culture in everyday life and at the workplace, civil liability. The following will be studied: anti-corruption legislation, the system and activities of anti-corruption subjects, causes and conditions conducive to corruption, anti-corruption policy, international experience in combating corruption.
-
Entrepreneurship
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Purpose: to form basic knowledge in the field of theory and practice of creating your own business, necessary for the formation of: an economic way of thinking. The internal and external environment of business entrepreneurship are considered; state regulation and the role of the state for the business environment
-
Programming in High-Level Languages
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The goal of the course is to form professional competencies in programming in high-level languages. Will be considered: the structure of object-oriented programming using high-level languages, аlgorithms, simple data structures and object-oriented concepts, object-oriented design, event-driven programming, network programming in high level languages, enter data and print the results of the program, create, compile and run object-oriented programs using VS.
-
Design of mechanical systems
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The aim of the course is to develop students' knowledge on the methodology for optimal design of flat lever mechanisms and other structures. In this course, students will get acquainted with the software implementation of the kinematic analysis of planar mechanisms, with the force analysis of the mechanisms under study and minimizing the total mass of mechanisms in the design, learn how to rationally choose the structure and parameters of the mechanisms, in which the technological process will be organized by the best choice.
-
Design of robots and robotic systems
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Purpose: to form the ability to teach the principles and methods of designing robots and RS, collaborative robotic systems using modern hardware and software products. Will be studied: machine design of RS based on the use of modern automated programs; building models; study of CAD for the creation of RS.
-
Synthesis of Mechanisms
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The aim of the course the formation of system knowledge in the field of synthesis of lever mechanisms In this course, the stages of solving the problem of the synthesis of lever mechanisms, the main features of the classification of the tasks of synthesis (design) of lever mechanisms, methods of synthesis of lever mechanisms will be considered.
-
Stochastic analysis in mechanics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: Acquaintance of students with the basic concepts and results of stochastic processes and their applications in mechanics. Random process: general definition, trajectory, finite-dimensional distributions, main classes. Elements of random analysis. Poisson process. Wiener process. Stochastic integrals. The Itô integral over the Wiener process. Stochastic differential. Ito formula: one-dimensional and two-dimensional cases. The simplest stochastic differential equations. Ornstein-Uhlenbeck process. Mathematical models of random processes in mechanics
-
Theory of Mechanisms and Machines
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline is the formation of the necessary initial knowledge base on the general methods of analysis and synthesis of mechanical systems. Will be studied: the main types of mechanisms, their kinematic and dynamic characteristics; the principle of operation of individual mechanisms and their interaction in the machine; kinematic and dynamic parameters of mechanisms, modern techniques for measuring the kinematic and dynamic parameters of machines.
-
The Theory of Plasticity
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of fundamental knowledge on the basics of the theory of plasticity and practical skills in applying analytical methods to solving problems of plastically deformable bodies. This course introduces the basic concepts and terms, equations and problem statements of Solid Mechanics, allows you to master the traditional analytical methods for solving a number of theoretical and applied problems of this course on the calculation of plastically deformable objects under consideration.
-
Control of robotic systems
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the course: the formation of students' systemic knowledge in the field of control of robotic systems and manipulators and practical skills in solving the problem of dynamics and control of a manipulative robot using computer technology. This course will study: the basics of control theory, control of robotic systems and manipulators (manipulator trajectory planning, control of the Puma manipulator, with a control device for a multi-joint robot, with adaptive control).
-
Abais Teaching
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The goal of the discipline is to form in future specialists the ability to self-knowledge, the use of Abai's doctrine as the basis of spirituality and intellectuality of modern Kazakhstan, the application of their professional knowledge, understanding and abilities through the prism of humanism and education in order to strengthen the unity of the country and civil solidarity of society.The following will be studied: the concept of the teachings of Abai; sources of teaching; components of Abai's doctrine; categories of Abai's doctrine; measuring instruments of the teachings of Abai; the essence and meaning of Abai’s doctrine.
-
Chemistry
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' fundamental knowledge of the basic laws of chemistry and practical skills in solving problems of chemical kinetics and chemical equilibrium, in conducting chemical experiments. This course will study: basic chemical laws, the periodic law, the structure of atoms and molecules, chemical bonding, chemical equilibrium and kinetics, chemical thermodynamics, basic properties of solutions, redox reactions and their applications, complex compounds, chemical experiment.
-
Ecology and Human Life Safety
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The goal of the discipline is to form a number of key competencies based on modern environmental management concepts that implement the principles of harmonious optimization of the conditions for human interaction with nature, including in the process of tourist and recreational activities.The following will be studied: the principles of sustainable development, conservation and reproduction of natural resources to ensure the safety of human life, methods for assessing and minimizing risks, protecting against dangers, including during travel, measures to eliminate the consequences of accidents, anthropogenic disasters, natural disasters, environmental protection and rational environmental management.
-
Experimental Hydromechanics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' systemic knowledge of modeling real flows of liquid and gas and practical skills in conducting experimental research on various experimental installations. Students will conduct experimental studies on the laboratory facilities "Hydrodynamics" and "Hydraulics", will measure pressure and fluid flow through the pipe, determine the average fluid flow rate, fluid flow regimes, pipe resistance coefficient, etc.
-
Experimental Methods in Machines Mechanics
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the course: familiarization of students with the principles of operation of sensors, description of their designs, with the basics of planning an experiment, experimental measurement of the parameters of mechanical systems, mathematical methods for processing the results of an experiment. Within the framework of the discipline, the designs and basic principles of operation of the most commonly used transducers (sensors) in the mechanics of machines and robots are considered. stages of the experiment, mathematical processing of experimental data, construction of mathematical models with verification of their adequacy
-
Theory of Filtration
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The goal of the course is to develop students' knowledge by modern methods of studying the problems of filtration of incompressible and / or weakly compressible liquids in porous media and soils. To know: basic concepts and theoretical foundations of the theory of filtration. To be able to: apply the mathematical apparatus for solving flow problems, to build a model of seepage flows. Owning: solving skills filtration of incompressible fluids in porous media and soils of modern methods of research.
-
Fundamentals of the Theory of Turbulence
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: The purpose of the discipline: the formation of students' basic knowledge on the basics of the theory of turbulence. After completing the course, the student will be able to explain the main provisions of the theory of turbulence, apply knowledge in practical problems of modeling turbulent flows.
-
Translational-Rotational Motion of Celestial Bodies
- Type of control: [RK1+MT+RK2+Exam] (100)
- Description: Students on the subject of «Translational-Rotational Motion of Celestial Bodies» study translational-rotational motion of two non-stationary bodies. The motion of two non-stationary bodies is investigated in the following cases: spherical and axisymmetric bodies, triaxial body and triaxial body, spherical and triaxial body
-
Pre-diploma
- Type of control: Защита практики
- Description: The goal of the practice is to form the ability to integrate the theory and methodology of technological and chemical disciplines to solve practical problems related to future professional activities. The practice is aimed at the formation of an independent solution to real problems in the field of chemical technology of inorganic substances using the competencies obtained in the course of mastering the educational program.
-
Production
- Type of control: Защита практики
- Description: Consolidation of theoretical and practical knowledge obtained at the university, familiarization with the organization and production technology, the acquisition of practical skills and professional experience in the field of study. As a result of the internship, the student will be able to study and analyze the necessary information, to carry out the necessary calculations using modern technical means.
-
Educational
- Type of control: Защита практики
- Description: Сonsolidation of the received theoretical knowledge, professional orientation of students; familiarization and study of the organization of activity, structure, directions of scientific activity of the department, faculty, university. - use knowledge of physical laws and theories to explain the structure of matter, forces and interactions in nature, the origin of fields; use acquired knowledge in practice and in everyday life;